States ›Alabama ›Choctaw County ›Butler

Butler, AL Tap Water Quality 2026

Water quality report for Butler, AL — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Butler's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Butler Water System PWSID: AL0000232 Updated: 2026 Q2
✅

No federal limits exceeded on record

Lead is 2.70 ppb, 18% of the action level and no violations are open. No PFAS was detected.

A

Butler earns an A for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: 2.70 ppb — 18% of the federal action level
PFAS tested, none detected
6 violations since 2015, 2 health-based
No violations currently open
Butler's lead level vs. all Alabama community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: 2.70 ppb — 18% of the federal action level
✓ Lower lead than 20% of Alabama utilities
Population Served
1611
~1532 connections
Water Source
Groundwater
Drawn from wells — SDWIS source code GW
Active Violations
0
6 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
18% of EPA action level
2.70 ppb
Action level: 15 ppb
The 90th-percentile lead result is 2.70 ppb, 18% of the 15 ppb federal action level. The action level is a treatment trigger, not a legal maximum, and it is measured across sampled taps rather than at any single home.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
TTHM MONITORING AND REPORTING — 0.080 mg/L 2024 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2024 Resolved
TTHM MCL EXCEEDANCE 0.089 MG/L 0.080 mg/L 2024 Resolved
TTHM MONITORING AND REPORTING — 0.080 mg/L 2024 Resolved
TTHM MCL EXCEEDANCE 0.083 MG/L 0.080 mg/L 2024 Resolved
Revised Total Coliform Rule REPORTING FAILURE — — 2022 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

6 violations are on record since 2015, of which 2 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Butler Water System
PWSID AL0000232
Water source Groundwater — Drawn from wells — SDWIS source code GW
Population served 1,611
Service connections 1,532
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Butler tap water safe to drink? ▼
No federal limit is exceeded on record. No violations are currently open. Lead is 2.70 ppb, 18% of the action level.
Does Butler water have PFAS? ▼
It was tested for the six regulated PFAS compounds and none were detected.
Who supplies water to Butler? ▼
Butler Water System (PWSID AL0000232). Groundwater. Drawn from wells — SDWIS source code GW
When was this system last inspected? ▼
It was last inspected on 2025-06-11. No significant deficiencies were recorded.

What Should Butler Residents Do?

1
Read your annual water report
Your supplier publishes a Consumer Confidence Report each July covering the prior year.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Alabama

Lisman, Al Tap Water Quality 2026 Choctaw Gilbertown, Al Tap Water Quality 2026 Choctaw Pennington, Al Tap Water Quality 2026 Choctaw