States ›Alabama ›Chilton County ›Clanton

Clanton, AL Tap Water Quality 2026

Water quality report for Clanton, AL — PFAS, lead and copper results, violation history and state inspection findings from EPA SDWIS.

A look at Clanton's drinking water using EPA enforcement records: violations, lead and copper results, PFAS sampling and state inspection findings.

Main Utility: Clanton, The Ww & Sb Of The City Of PWSID: AL0000213 Updated: 2026 Q2
⚠️

PFAS above the federal limit

Lead was not detected and no violations are open. However, PFAS exceeds the federal limit at 1 of 1 sampling points, running as high as 5.38 times the limit.

C

Clanton earns a C for water quality

Graded on violations, lead, and PFAS, with state inspection findings.

Lead: not detected
PFAS above the federal limit at 1 of 1 sampling points
4 violations since 2015, 0 health-based
No violations currently open
Clanton's lead level vs. all Alabama community water systems
0 ppb5 ppb10 ppb15 ppb
Lead level: Not detected — 0% of the federal action level
✓ Lower lead than % of Alabama utilities
Population Served
8116
~4500 connections
Water Source
Surface water
Drawn from surface water — SDWIS source code SW
Active Violations
0
4 since 2015, all resolved

Lead & Copper Testing

Lead (Pb)
90th percentile of tap samples collected across the distribution system
0% of EPA action level
Not detected
Action level: 15 ppb
Lead was not detected at the 90th percentile — the result fell below the laboratory detection limit. That is not the same as an absence of lead in every tap, and older homes with lead service lines can still show higher readings.

Contaminant Violations (2015–Present)

ContaminantTypeMeasuredLimitPeriodStatus
Revised Total Coliform Rule REPORTING FAILURE — — 2026 Resolved
Chlorite MONITORING AND REPORTING — 1.0 mg/L 2022 Resolved
Chlorite MONITORING AND REPORTING — 1.0 mg/L 2022 Resolved
LASSO MONITORING AND REPORTING — — 2020–2022 Resolved
Understanding violation types MCL violations mean a contaminant exceeded the federal maximum limit — the most serious type.
TT (Treatment Technique) violations mean required treatment procedures weren't followed, but don't necessarily mean contamination occurred.

Violation History

4 violations are on record since 2015, of which 0 were health-based. All have been resolved and none remain open.

About the Main Water System

Utility Clanton, The Ww & Sb Of The City Of
PWSID AL0000213
Water source Surface water — Drawn from surface water — SDWIS source code SW
Population served 8,116
Service connections 4,500
Systems serving this area 1
Regulator State primacy agency
Data through 2026 Q2 — EPA SDWIS

Frequently Asked Questions

Is Clanton tap water safe to drink? ▼
It meets most federal standards, but PFAS exceeds the federal limit at 1 of 1 sampling points. No violations are currently open.
Does Clanton water have PFAS? ▼
Yes. PFAS exceeds the federal limit at 1 of 1 sampling points, running as high as 5.38 times the limit. Limits are enforced on a running annual average at each sampling point, not on a single sample.
Who supplies water to Clanton? ▼
Clanton, The Ww & Sb Of The City Of (PWSID AL0000213). Surface water. Drawn from surface water — SDWIS source code SW
When was this system last inspected? ▼
It was last inspected on 2025-03-27. No significant deficiencies were recorded.

What Should Clanton Residents Do?

1
Consider a reverse-osmosis filter
Reverse osmosis removes more than 95% of PFAS. Standard carbon pitchers do not.
2
Check for a lead service line
Lead reaches tap water mainly through service lines and household plumbing. Suppliers now publish an inventory identifying lead lines.
3
Flush before drinking
If water has sat in pipes more than six hours, run the cold tap for two minutes before drinking or cooking.

Nearby Cities in Alabama

Jemison, Al Tap Water Quality 2026 Chilton Thorsby, Al Tap Water Quality 2026 Chilton Maplesville, Al Tap Water Quality 2026 Chilton